A biotechnology company produced 225 doses of somatropin, including 11 which were defective. Quality control test 15 samples at random, and rejects the batch if any of the random samples are found defective. What is the probability that the batch gets rejected?

Explanation:

The batch is rejected if any of the random samples are found defective, or, what is the same, it will be accepted only if all 15 samples are good.

The probability that none be defective is the same probability that all the samples are good. Thus, start to calculate the probability that the batch is accepted.

The probability that the first sample is good is 214 /225, because there are 225 - 11 = 214 good samples in 225 doses.

The probability that the second samples is good too is 213/224, because there is 1 less good sample, in the 224 remaining samples.

By the same process, you conclude that the consecutive probabilities of selecting a good sample are: 212/223, 211/222, 210/221, . . . up to 199/211.

The joint probability of all the samples are good is the product of each probability:

The result is: 0.41278 ≈ 0.41

The conclusion is that the probability that all the samples are good and the batch is accepted is 0.41.

Therefore, the probability that the batch is rejected is 1 - 0.41 = 0.59.

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about