Engineering, 06.03.2020 17:36 kfliehman1
Write an HDL code for an 32-bit Universal Shift Register with a positive-edge sensitive clock, a synchronous enable (highest priority), and an asynchronous negative-edge sensitive reset. The register can be loaded with serial in (1-bit) or parallel in (32-bit), and can be read serially (1-bit) or in parallel (32- bit). Also the register can perform left or right shift with a selection bit (1 for left shift, and 0 for right shift). b) Write a testbench for the module you wrote in (a) to test all of the corner cases.
Answers: 3
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Write an HDL code for an 32-bit Universal Shift Register with a positive-edge sensitive clock, a syn...