Steam is to be condensed in the condenser of a steam power plant at a temperature of 60°C with cooling water from a nearby lake, which enters the tubes of the condenser at 15°C at a rate of 80 kg/s and leaves at 30°C. Determine the rate of condensation of the steam in the condenser.

The rate of condensation of the steam in the condenser is 2.14 kg/s

Explanation:

Given;

mass flow rate of water = 80 kg/s

inlet temperature of water, T₁ = 15°C

outlet temperature of water, T₂ = 30°C

temperature of the steam, ΔHvap. = 60°C

heat of vaporization of water at 60°C = 2357.7 kJ/kg

specific heat capacity of water = 4.2 kJ/kg°C

The rate of condensation can be determined by the rate of heat transfer of water as a cooling system.

substitute the above values in this equation, we will have;

Therefore,  the rate of condensation of the steam in the condenser is 2.14 kg/s

The rate of condensation is found to be 2.127 kg/s

Explanation:

We take water entering and leaving the condenser in the tubes as the system. Applying the law of conservation of energy to this steady state system:

Ein = Eout

Qin + mh1 = mh2     , neglecting the changes in kinetic and potential energie.

Qin = m(h2 - h1)

Qin = mCp(T2 - T1)

where,

Qin = rate of heat transfer to the cold water from steam

m = mass flow rate of cold water = 80 kg/s

Cp = specific heat capacity of cold water = 4.18 KJ/kg.k

T1 = 15°C

T2 = 30°C

Therefore,

Qin = (80 kg/s)(4.18 KJ/kg.k)(15 k)

Qin = 5016 KJ/s

Now, the rate of condensation of steam is given as:

Qin = (m)(hfg)

m = Qin/hfg

where,

m = rate of condensation of steam

hfg = heat of vaporization of water at 60°C = 2357.7 KJ/kg

Therefore,

m = (5016 KJ/s)/(2357.7 KJ/kg)

m = 2.127 kg/s

this is true

explanation:

i looked it up

unlike the threaded fasteners which are used to clamp the machine members, power screws are used to transmit power. common applications of power screws are: screw jacks: to lift weight. lead screw of lathe: for axial movement of tool and its precise positioning.