Engineering, 07.03.2020 02:59 pilararcos

Problem 4 You are designing a circuit to drive LED1, using the following circuit. The datasheet for the LED specifies that VF = 2 V. Treat LEDs as diodes with the constant voltage model. (a) Find the expected current through the LED I(LED) when VF = 2 V (b) After testing, it is determined that some LEDs within a batch do not light up correctly in the circuit for part a. It is suspected that this is because there is some variation in among the LEDs in the batch. Find the maximum value of VF such that the circuit above stops working I(LED) drops to zero so you can characterize this problem and report it to the manufacturer.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

You know the right answer?

Problem 4 You are designing a circuit to drive LED1, using the following circuit. The datasheet for...

Questions