Engineering, 07.03.2020 03:15 hannmq4179

A vineyard owner is planting several new rows of grapevines, and needs to know how many grapevines to plant in each row. She has determined that after measuring the length of a future row, she can use the following formula to calculate the number of vines that will be in the row, along with the trellis end-post assemblies that will need to be constructed at each end of the row: R-2E The terms in the formula are o V is the number of grapevines that will fit in the row. A131 Programming Assignment ·R is the length of the row, in feet E is the amount of space, in feet, used by an end-post assembly . S is the space between vines, in feet. Write a program that makes the calculation for the vineyard owner. The progranm should ask the user to input the following » The length of the row, in feet . The amount of space used by an end-post assembly, in feet . The amount of space between vines, in feet Once the input data has been entered, the program should calculate and display the number of (whole) grapevines that will fit in the row. Enter the length of the row (in feet): 20 Enter the length of the end-post (in feet): 4 Enter how much space between vines (in feet): 2 You can plant 6 vines

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

You know the right answer?

A vineyard owner is planting several new rows of grapevines, and needs to know how many grapevines t...

Questions