Engineering, 10.03.2020 07:25 kingoc321

-Mn has a cubic structure with a0 = 0.8931 nm and a density of 7.47 g/cm3. -Mn has a different cubic structure, with a0 = 0.6326 nm and a density of 7.26 g/cm3. The atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. Determine the percent volume change that would occur if -Mn transforms to -Mn. (9 poi

Answers: 2

Show answers

Answers

Answer from: luvberries2276

The percentage volume change is -3.0%

Explanation: We are to determine the percentage change that will occurs is alpha-Mn is transformed to beta-Mn

Value are defined as;

Cubic structure (a0) for alpha-Mn = 0.8931nm = 0.8931e-9m = 7.1236e-28cm3

Cubic structure (a0) for beta-Mn = 0.6326nm = 0.6326e-9m = 2.5316e-28cm3

Density of alpha-Mn = 7.47g/cm3

Density of beta-Mn = 7.26g/cm3

Atomic weight of Mn = 54.938g/mol

Atomic radius of Mn = 0.112nm

STEP1: CALCULATE THE ATOM NUMBER PER CELL IN THE ALPHA-Mn;

Atom per cell = (density × cubic structure × Avogadro's constant) ÷ (atomic weight ) × 100000

(7.47× 7.1236e-28 × 6.02e23) ÷ 54.938 = 58.31

Therefore the number of Atom in alpha-Mn is 58.31 atom per cell

STEP2: CALCULATE THE NUMBER OF ATOM PER CELL IN THE BETA-Mn

Atom per cell = (density × cubic structure × Avogadro's constant) ÷ (atomic weight) × 1000000

(7.26 × 2.5316e-28 × 6.02e23) ÷ 54.938 = 20.14

Therefore the number of Atom in beta-Mn is 20.14 atom per cell

STEP3: CALCULATE THE PERCENTAGE VOLUME OF ALPHA-Mn AND BETA-Mn

V% = [(volume of atom × number of atom per cell) ÷ volume of unit cell] × 1000

For Alpha-Mn:

[(1.4049e-30 × 58.31) ÷ 7.1236e-28] × 1000 = 114.998%

For Beta-Mn:

[(1.4049e-30 × 20.14) ÷ 2.5316e-28] × 1000 = 111.766%

STEP4: CALCULATE THE CHANGE IN PERCENTAGE VOLUME FOR ALPHA TO TRANSFORM TO BETA

change = final state - initial state

Therefore;

Change = 111.766 - 114.998 = -3.23%

Therefore for a transformation of Alpha-Mn to Beta-Mn they will be a decrease in volume

Answer from: Quest

The main difference between gui and cli is that the graphical user interface (gui) allows the user to interact with the system using graphical elements such as windows, icons, menus while the command line interface (cli) allows the user to interact with the system using commands

Answer from: Quest

answer:

explanation:

assault rifle is a rapid-fire, magazine-fed rifle designed for military use. it is a shoulder-fired weapon that allows the shooter to select between semi-automatic (requiring you pull the trigger for each shot), fully automatic (hold the trigger and the gun continuously fires) or three-shot-burst modes.

Another question on Engineering

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

You know the right answer?

-Mn has a cubic structure with a0 = 0.8931 nm and a density of 7.47 g/cm3. -Mn has a different cub...

Questions