Engineering, 10.03.2020 07:43 lizredrose5

Assume that the water temperature is 10°C and the depth of the settling tank is 3.0 m (9.80 ft). Calculate the theoretical settling velocity (cm/s), tank loading (m3/m2/d) and detention time (h) required for the complete removal of the following particles in a settling tank. Assume discrete particle settling A. Sand particles with a relative density of 2.65 and dia. of 0.001 cm to be removed in a presettling tank B. Alum floc with a relative density of 1.002 and dia. of 1.0 mm to be removed in a settling tank after coagulation. C. What will be the corresponding design loading rate and detention time for the above cases if the efficiency of the settling basins is 50%, assuming the removal is linearly related to efficiency?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

You know the right answer?

Assume that the water temperature is 10°C and the depth of the settling tank is 3.0 m (9.80 ft). Cal...

Questions