subject
Engineering, 10.03.2020 07:41 jujulakaeuaws

A tank of volume 1.2 m3 initially contains steam at 8 MPa and 4008C. Steam is withdrawn slowly from the tank until the pressure drops to p. Heat transfer to the tank contents maintains the temperature constant at 4008C. Neglecting all kinetic and potential energy effects and assuming specific enthalpy of the exiting steam is linear with the mass in the tank, (a) determine the heat transfer, in kJ, if p 5 2 MPa. (b) plot the heat transfer, in kJ, versus p ranging from 0.5 to 8 MPa.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
You know the right answer?
A tank of volume 1.2 m3 initially contains steam at 8 MPa and 4008C. Steam is withdrawn slowly from...
Questions
question
Health, 08.07.2020 02:01
question
Mathematics, 08.07.2020 02:01
question
Mathematics, 08.07.2020 02:01
Questions on the website: 13722361