Engineering, 10.03.2020 08:22 QuestionsAnsweredNow

Kirchoff's Law states that, by the time current has returned to its source, all
must be used
Resistance
Electron flow
Voltage
Wattage

Answers: 3

Show answers

Answers

Answer from: Kassi07

Kirchoff's Law Kirchoff's Law states that, by the time current has returned to its source is explained in the following.

Explanation:

Kirchhoff's Current Law (KCL) is Kirchhoff's first law that deals with the conservation of charge entering and leaving a junction. ... In other words the algebraic sum of ALL the currents entering and leaving a junction must be equal to zero.Kirchoff's laws apply for a given instant in time. So the voltages at a given moment around a loop will all sum to zero, or currents in a node sum to zero if you look at the instantaneous voltage and current. But they will be out of phase.Kirchhoff Voltage Law states that ''The algebraic sum of all voltages (source voltage and voltage drops) is equal to zero around a close path''. This is called KVL ( Kirchhoff Voltage Law) equation. The source voltage is equal to the sum of all voltage drops. Kirchhoff's Voltage Law (KVL) is Kirchhoff's second law that deals with the conservation of energy around a closed circuit path. Kirchhoff's laws can be used to determine the values of unknown values like current, Voltage in the circuit. These laws can be applied on any circuit (with some limitation), and useful to find the unknown values in complex circuits and networks.

Answer from: lizredrose5

Kirchoff's law states that by the time current has reached to its source all voltage must be used.

Explanation:

Kirchoff's voltage law states that the algebraic sum of all the voltages across a closed loop is zero. As the circuit is a closed conducting path, no energy is lost. ices All the voltage that is supplied from the voltage source is dropped at the devices in the circuit.

The potential difference maintained by the voltage source enables the flow of current across the circuit. As the supplied voltage drops at each elements of the circuit, all voltage is used by the time current has returned to the surface.

Answer from: Quest

answer: i have no clue tbh

explanation:

it happens to me to tho

Answer from: Quest

yes indeed

mayonaise pizza

good

dad gone me

Another question on Engineering

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

You know the right answer?

Kirchoff's Law states that, by the time current has returned to its source, all
must be used

Questions