To increase the thermal efficiency of a reversible power cycle operating between thermal reservoirs at TH and Tc, would you increase TH while keeping To constant, or decrease To while keeping TH constant? Are there any natural limits on the increase in thermal efficiency that might be achieved by such means? Consider how η responds to a change in temperature-if either temperature is changed by some r, which will have a greater effect? Hint: Check the derivative of η with regard to TH and Tc separately

Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w