subject
Engineering, 11.03.2020 18:37 CadenSkinner2003

Problem 1: Weight Volume Relationships
Given:
Borrow soil will be required to fill a 1,000 yd depression in the ground. The borrow soils have a
moist unit weight of 100 pcf, a water content of 12% and a specific gravity of 2.60. The job
specification requires that the fill soils need to be compacted to a dry unit weight of 110 pcf
and a water content of 15%.
Compute:
A) How many cubic yards of borrow soil are needed?
B) How many gallons of water will have to be added to achieve the required moisture content
in the fill areas, assuming there is no loss due to evaporation during transportation?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 08:10
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
You know the right answer?
Problem 1: Weight Volume Relationships
Given:
Borrow soil will be required to fill a 1,000...
Questions
question
Biology, 25.08.2020 20:01
question
Mathematics, 25.08.2020 20:01
Questions on the website: 13722363