If the slotted arm rotates counterclockwise with a constant angular velocity of thetadot = 2rad/s, determine the magnitudes of the velocity and acceleration of peg P at theta = 30 degrees. The peg is constrained to move in the slots of the fixed bar CD and rotating bar AB.

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.