Engineering, 12.03.2020 04:57 Savadt2810
As part of a heat treatment process, cylindrical, 304 stainless steel rods of 125-mm diameter are cooled from an initial temperature of 500C by suspending them in an oil bath at 30C.
If a convection coefficient of 400 W/m^2K is maintained by circulation of the oil, how long does it take for the centerline of a rod to reach a temperature of 50C, at which point it is withdrawn from the bath?
If 10 rods of length L =1m are processed per hour, what is the nominal rate at which energy must be extracted from the bath (the cooling load)?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
Engineering, 04.07.2019 19:20
Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3
Answers: 2
Engineering, 04.07.2019 19:20
Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?
Answers: 3
You know the right answer?
As part of a heat treatment process, cylindrical, 304 stainless steel rods of 125-mm diameter are co...
Questions
Mathematics, 19.08.2019 12:10
Mathematics, 19.08.2019 12:10
Biology, 19.08.2019 12:10
Social Studies, 19.08.2019 12:10
Biology, 19.08.2019 12:10
Mathematics, 19.08.2019 12:10
Mathematics, 19.08.2019 12:10
Social Studies, 19.08.2019 12:10
Mathematics, 19.08.2019 12:10
Biology, 19.08.2019 12:10
Mathematics, 19.08.2019 12:10
