Engineering, 12.03.2020 05:03 shazaam1657

Melinda is using a rectangular brass bar in a sculpture she is creating. the brass bar has a length that is 4 more than 3 times its width if the area of the rectangular brass bar is 480 inches what are the dimensions answer

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 19:10

Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates

Answers: 3

Answer

Engineering, 06.07.2019 05:20

An ideal gas expands in an adiabatic turbine from 1200 k and 900 kpa to 800 k. determine the turbine inlet volume flow rate of the gas, in m'/s, required to produce turbine work output at the rate of 650 kw. the average values of the specific heats for this gas over the temperature range and the gas constant are op 1.13 kj/kg.k, v 0.83 kj/kg k, and r 0.30 kj/kg k

Answers: 2

Answer

Engineering, 06.07.2019 05:20

A8-in.-diameter steel shaft is to have a press fit with a 16-in-diameter cast iron hub. both the hub and the shaft are 10 in long. using maximum normal stress theorem and appropriate safety factor, it was identified that the maximum allowable circumferential (a.k.a. hoop or tangential) stress in the hub is to be 7.5 ksi. the moduli of elasticity are 30 x 106 psi for steel and 15 x 106 psi for cast iron. the poisson's ratio for both steel and cast ron is 0.3 and coefficient friction for the two materials is 0.12. determine a. the interference or the original mismatch, 8 b. the maximum axial force required to press the hub on the shaft

Answers: 1

Answer

Engineering, 06.07.2019 06:10

Aparallel helical gearset consists of a 19-tooth pinion driving a 57-tooth gear. the pinion has a left-hand helix angle of 30, a normal pressure angle of 20, and a normal module of 2.5 mm. find: (a) the normal, transverse, and axial circular pitches (b) the transverse diametral pitch and the transverse pressure angle (c) the addendum, dedendum, and pitch diameter of each gear

Answers: 1

Answer

You know the right answer?

Melinda is using a rectangular brass bar in a sculpture she is creating. the brass bar has a length...

Questions