Engineering, 12.03.2020 06:46 ari9843

1.) Electric current flows through a flat steel plate that is 1 cm thick. Electrical power is dissipated via Joule heating of the plate. At steady state, the temperature distribution across the thickness of the plate is given by: TT(xx) = 2.5 K�1 − xx2 (0.5 cm)2� + 10 K � xx 0.5 cm� + 313 K The two surfaces of the plate are located at x = -0.5 cm and x = 0.5 cm.

The thermal conductivity of the plate is 50 W/m/K.

a. How much electric power is dissipated per unit area of the plate?

b. What are the values of heat flux at the two surfaces of the plate?

c. For each surface, is the heat flux directed toward or away from the surface?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 08:10

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

You know the right answer?

1.) Electric current flows through a flat steel plate that is 1 cm thick. Electrical power is dissip...

Questions