Engineering, 12.03.2020 17:43 erikacastro259
A box weighing 25 pounds (assumed concentrated at its center of gravity) is being pulled by a horizontal force F equal to 20 pounds. What is the moment about point A? Does the box tip over
Answers: 1
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
A box weighing 25 pounds (assumed concentrated at its center of gravity) is being pulled by a horizo...
Geography, 31.10.2020 14:00
Geography, 31.10.2020 14:00
English, 31.10.2020 14:00
English, 31.10.2020 14:00
History, 31.10.2020 14:00
Mathematics, 31.10.2020 14:00
Health, 31.10.2020 14:00
Health, 31.10.2020 14:00
Physics, 31.10.2020 14:00
Mathematics, 31.10.2020 14:00
Social Studies, 31.10.2020 14:00
Mathematics, 31.10.2020 14:00
Advanced Placement (AP), 31.10.2020 14:00
Mathematics, 31.10.2020 14:00
English, 31.10.2020 14:00
History, 31.10.2020 14:00
Mathematics, 31.10.2020 14:00