Engineering, 12.03.2020 17:56 canyonrico05
Use your values of the elastic modulus and Poisson's ratio (experimental values) to calculate the fractional change in volume experienced by the gage section of your specimen on being stressed from zero to the maximum applied stress.
elastic modulus =29370000 psi
poison ratio =.27
original dimensions were 24.5 inches length by 1.506inches width by .4383inches height.
Answers: 1
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
Use your values of the elastic modulus and Poisson's ratio (experimental values) to calculate the fr...
Mathematics, 16.03.2020 22:53
History, 16.03.2020 22:53
Mathematics, 16.03.2020 22:53
English, 16.03.2020 22:53
Mathematics, 16.03.2020 22:53
Social Studies, 16.03.2020 22:53