Engineering, 13.03.2020 02:26 ewitskarleigh814

An asphalt producer proposes an asphalt with the following properties for this rest area: o Maximum specific gravity of the asphalt mixture: 2.535 o Bulk specific gravity of the asphalt mixture at Ndes: 2.46 o Bulk specific gravity of the asphalt mixture at Nmax: 2.49 o Bulk specific gravity of the aggregate blend: 2.68 o Effective specific gravity of the aggregate blend: 2.71 o Apparent specific gravity of the aggregate blend: 2.75 o Maximum aggregate size of the aggregate blend: 19.0 mm o Nominal maximum aggregate size of the aggregate blend: 12.5 mm o Specific gravity of the binder: 1.03 o Mass percentage solids: 94% o Mass percentage dust (< #200) in the aggregates: 10.0% Is this asphalt in agreement with Superpave MoDOT specs for the volume of air, the voids in the mineral aggregates, the voids filled with asphalt and the dust-to-binder ratio? Do you expect any performance problems?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

Answer

You know the right answer?

An asphalt producer proposes an asphalt with the following properties for this rest area: o Maximum...

Questions