Engineering, 17.03.2020 00:31 genyjoannerubiera
Calculate the RWL and the LI for the following task. As forgings exit a cooling bath, they are loaded into various tumblers for finishing. Each forging weighs 15 pounds and is lifted from a conveyor that is 36 inches high to a tumbler that is 48 inches high. The forgings are relatively small, so the hands are only 5 inches from the waist. The process completes a forging every 10 seconds. The coupling is considered fair, and the operator works a full 8-hour shift.
Answers: 2
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Calculate the RWL and the LI for the following task. As forgings exit a cooling bath, they are loade...
Mathematics, 10.12.2020 22:20
Mathematics, 10.12.2020 22:20
Mathematics, 10.12.2020 22:20
Arts, 10.12.2020 22:20
Biology, 10.12.2020 22:20
Mathematics, 10.12.2020 22:20
Mathematics, 10.12.2020 22:20
Mathematics, 10.12.2020 22:20
Mathematics, 10.12.2020 22:20
Mathematics, 10.12.2020 22:20
Chemistry, 10.12.2020 22:20
Chemistry, 10.12.2020 22:20