Engineering, 17.03.2020 05:56 emmaschloegl21x
8. A railcar is being splash filled with toluene. The cars are 38 m3 in volume, and the filling hole is 0.10 m in diameter. It takes 30 minutes to fill the rail car. Estimate the concentration of toluene in this vicinity if the ventilation rate is 85 m3/min. The temperature is 25°C and the pressure is 1 atm. Assume non-ideal mixing (k=0.1).
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 19:20
Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w
Answers: 2
You know the right answer?
8. A railcar is being splash filled with toluene. The cars are 38 m3 in volume, and the filling hole...
Questions
Mathematics, 31.07.2019 14:10
Mathematics, 31.07.2019 14:10
English, 31.07.2019 14:10
Biology, 31.07.2019 14:10
Mathematics, 31.07.2019 14:10
Mathematics, 31.07.2019 14:10
English, 31.07.2019 14:10
English, 31.07.2019 14:10
Biology, 31.07.2019 14:10
