Engineering, 18.03.2020 22:36 salvadorjr1226p4zkp3

The data below were obtained for the adsorption of CO on charcoal at 273 K using an instrument that measures the volume (corrected to 1 atm pressure) of gas molecules that become adsorbed onto a surface as a function of its pressure in the surround gas phase. Such measurements are commonly performed in order to quantify the surface area of a material. The charcoal sample had a mass of 0.5 g and a CO adsorption site density of 5x10¹⁵ cm⁻².

Pco (torr) 100 200 300 400 500 600 700
V (cm³) 10.3 19.3 27.3 34.1 40 45.5 48

(a) Is the data consistent with a Langmuir isotherm? Support your answer. Hint: you will need to modify the Langmuir isotherm for a single species to convert θ_a to V.
(b) Determine the adsorption equilibrium ratio (Kco) and the volume of CO that is adsorbed at complete coverage.
(c) What is the total surface area (S_a) of the piece of charcoal in m² per gram of charcoal?

Answers: 3

Show answers

Answers

Answer from: jenorajordan5387

The answers to the questions are;

(a) The data consistent with a Langmuir isotherm

(b) The adsorption equilibrium ratio (Kco) is 0.696 bar⁻¹ and

the volume of CO that is adsorbed at complete coverage, V is 123.09 cm³

Explanation:

(a) Yes the data is consistent with Langmuir isotherm as it satisfies the following equation

$V = \frac{V_m\times K \times P}{1 +K \times P}$

That is a plot of the data forms a straight line of the form $\frac{P}{V} = \frac{1}{V_m\times K}+\frac{P}{V_m}$ where the intercept is $\frac{1}{V_m\times K}$ and the slope is $\frac{1}{V_m}$

The values of the plot are as follows;

Pco/V Pco (bar) V (cm³)

0.012943919 0.133322368 10.3

0.013815789 0.266644737 19.3

0.01465081 0.399967105 27.3

0.015638987 0.533289474 34.1

0.016665296 0.666611842 40

0.017580972 0.799934211 45.5

0.019442845 0.933256579 48

Slope 1/V = 0.008124326 cm⁻³

V = 123.0871369 cm³

1/(V×K)= 0.011670999 bars/cm³

K =0.696112311 bar⁻¹

(b) From the graph, the slope is given as = 0.008124326, that is

$\frac{1}{V_m}$ = 0.008124326 and V = $\frac{1}{0.008124326 cm^{-3}}$ = 123.09 cm³

The intercept is given as = 0.011670999

Therefore, $\frac{1}{V_m\times K}$ = 0.011670999 bars/cm³ and

K $_{co}$ = $\frac{1}{123.09 cm^3*0.011670999 bars/cm^3}$ = 0.696 bar⁻¹.

Therefore the we have the specific volume given as

$\frac{V}{n} = \overline{\rm V} =\frac{RT}{P}$ = $\frac{(0.0821L \cdot atm/moles \cdot K)(273K)}{1 atm}$ = 22.41 l

With a CO adsorption site density of 5 x 10¹⁵ cm⁻² we have

CO molecule cross sectional area, σ, given as $\frac{1}{5*10^{15} cm^{-2}}$ = 2 x 10⁻¹⁶ cm²

Therefore we have

Area A = $\frac{\sigma \cdot N_A \cdot V_m}{\overline{\rm V}}$ = $\frac{(2\times 10^{-16} cm^2)(6.02\times 10^{23}mole ^{-1})(123.09 cm^3/gm)}{22400 cm^3}$ = 6.62 x 10⁵ cm²/gm

= ‪66.16 m²/gm.

The data below were obtained for the adsorption of CO on charcoal at 273 K using an instrument that

Answer from: Quest

No clue sorry. just trying to get points to ask my question

Answer from: Quest

answer:

d. attempt to find the owner, then leave your information if you cannot find them.

explanation:

d. represents both (b) and (c).

more logical as well.

b and c are to complicated.

glad i could , give me a follow, so if you need with any other question, im here.

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

Answer

You know the right answer?

The data below were obtained for the adsorption of CO on charcoal at 273 K using an instrument that...

Questions