A wound-field dc motor is driving a load whose torque requirement increases linearly with speed and reaches 5 Nm at a speed of 1,400 rpm. The armature terminal voltage is held to its rated value. At the rated Bf , the no-load speed is 1,500 rpm, and the speed while driving the load is 1,400 rpm. If Bf is reduced to 0.8 times its rated value, calculate the new steady state speed.

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature