subject
Engineering, 19.03.2020 05:00 Chente379

As an employee of the Los Angeles Air Quality Commission, you have been asked to develop a model for computing the distribution of NO2 in the atmosphere. The situation you are to consider is one in which the molar flux of NO2 at ground level, NAo, is known; this flux is attributed to automobile and smokestack emissions. It is also known that the concentration of NO2 at a distance well above ground level is zero and that NO2 reacts chemically in the atmosphere. In particular, NO2 reacts with unburned hydrocarbons (in a process that is activated by sunlight) to produce PAN (peroxyacetylnitrate), the final product of photochemical smog. The reaction is first order, and the local rate at which it occurs may be expressed as N_A = −k₁C_A.
(a) Assuming steady-state conditions and a stagnant atmosphere, obtain an expression for the vertical distribution C_A(x) of the molar concentration of NO2 in the atmosphere.
(b) If a NO2 partial pressure of p_A = 2×10^(−6) bar is sufficient to cause pulmonary damage, what is the value of the ground level molar flux for which you would issue a smog alert? You may assume an isothermal atmosphere at T = 300 K, a reaction coefficient of k_1 = 0.03 s^(−1), and a NO2−air diffusion coefficient of DAB = 0.15×10^(−4) m^2/s.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
question
Engineering, 06.07.2019 04:10
An inventor claims to have developed a reversed heat engine (ie. a heat pump) which is able to deliver 10 kj heat into the room at 20°c from outside ambient temperature of -10°c by consuming only 2 kj electricity in winter. this claim is a)-impossible b)-possible only if the heat pump is ideal c)-practically possible d)-unable to be assessed as it depends on the working fluid used in the heat pump.
Answers: 2
question
Engineering, 06.07.2019 04:20
Consider a beam traveling through diamond and impinging upon the diamond-air interface. the critical angle of incidence for total internal reflection to occur is closest to the following value: select one: a)-22.50° b)-23.85 c)-24.30 d)-23.40° e)-none of the above
Answers: 3
You know the right answer?
As an employee of the Los Angeles Air Quality Commission, you have been asked to develop a model for...
Questions
question
Mathematics, 24.01.2020 16:31
question
Geography, 24.01.2020 16:31
question
Mathematics, 24.01.2020 16:31
Questions on the website: 13722361