subject
Engineering, 19.03.2020 18:44 YoungKukie24

G Four primary sedimentation basins are designed for total average flow of 1.2 m3/s. The TSS concentration in the primary treated effluent is 150 mg/L, and TSS removal is 63 percent. The sludge has an average solids concentration of 6 percent and specific gravity of 1.045. What is the capacity of the sludge pump in m3/min per basin if the pump is used on a 15-min pumping cycle per h

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
You know the right answer?
G Four primary sedimentation basins are designed for total average flow of 1.2 m3/s. The TSS concent...
Questions
question
English, 02.04.2021 06:10
question
Mathematics, 02.04.2021 06:10
Questions on the website: 13722360