subject
Engineering, 19.03.2020 21:16 daniellecraig77

A flat plate is immersed in a Mach 2 flow at standard sea level conditions at an angle of attack of 2-degrees. Assuming the same shear stress distribution given in Example 1.8, calculate, per unit span: a) lift, b) wave drag, and c) skin friction drag. What percentage of the total drag is skin-friction? Compare this percentage with the 10-degree angle of attack case discussed in Example 1.8.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
You know the right answer?
A flat plate is immersed in a Mach 2 flow at standard sea level conditions at an angle of attack of...
Questions
question
Mathematics, 12.01.2021 07:00
question
Mathematics, 12.01.2021 07:00
question
Social Studies, 12.01.2021 07:00
question
Mathematics, 12.01.2021 07:00
question
Mathematics, 12.01.2021 07:00
question
Mathematics, 12.01.2021 07:00
Questions on the website: 13722359