Engineering, 19.03.2020 21:33 zesk
Air at 27 C and 1 atmflows over a flat plate at a speed of 2.5 m/sec. Calculate the boundarylayer thickness at distances of 20 and 40 cm from the leading edge of the plate. Assume unitdepth in the z direction. Now assume the plate is heated over its entire length to atemperature of 60 C. Calculate the heat transferred in a) the first 20 cm of the plate, and b)the first 40 cm of the plate.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
You know the right answer?
Air at 27 C and 1 atmflows over a flat plate at a speed of 2.5 m/sec. Calculate the boundarylayer th...
Questions
Mathematics, 02.11.2020 22:30
Health, 02.11.2020 22:30
Physics, 02.11.2020 22:30
History, 02.11.2020 22:30
Biology, 02.11.2020 22:30
History, 02.11.2020 22:30
Computers and Technology, 02.11.2020 22:30
History, 02.11.2020 22:30
Mathematics, 02.11.2020 22:30
Mathematics, 02.11.2020 22:30
Health, 02.11.2020 22:30
