Description: The beam is clamped on the left hand side, and it is allowed to move vertically on the right hand side but it i s n ot allowed to have a slope. The length of the beam is 15 inches and it is subject to a non uniform distributed load that follows a relationship q (x) = 1000 (x/10)^2 lbf/inch, and acts on the beam from x=0 (clamped end) to x=10 inches. The cross section is made of two pieces bonded together as shown. The modulus of the beam is 15 Msi.

One of the benefits of working with chlorinated polyvinyl chloride (CPVC) pipe is that it can be cut with a variety of different tools that don’t require any electricity or heat. However, different cutting methods are preferred over others, depending on the application.

When cutting CPVC pipe, it is important to make a square, flat cut. An uneven cut limits the bonding area and weakens the fitting.

To help you make the best possible cut, we’ve put together the following dos and don’ts when cutting CPVC pipe in different situations.

no

Explanation:

it depends where you live and what they have said for that place.

Explanation: