Engineering, 20.03.2020 23:31 leannaadrian
It is necessary to select a metal alloy for an application that requires a yield strength of at least 310 MPa while maintaining a minimum ductility of 27%. If the metal may be cold worked, decide which of the following are candidates: copper, brass, or a 1040 steel. Why? Figures on Page 38 in the lecture notes of Chapter 7 may be used.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
You know the right answer?
It is necessary to select a metal alloy for an application that requires a yield strength of at leas...
Questions
Mathematics, 30.10.2020 21:20
Mathematics, 30.10.2020 21:20
Social Studies, 30.10.2020 21:20
Mathematics, 30.10.2020 21:20
Mathematics, 30.10.2020 21:20
Mathematics, 30.10.2020 21:20
Advanced Placement (AP), 30.10.2020 21:20
Law, 30.10.2020 21:20
Mathematics, 30.10.2020 21:20
Mathematics, 30.10.2020 21:20
