Engineering, 21.03.2020 03:18 blaizelange2573
2. A diesel cycle with a compression ratio of 18 operates on air with a low temperature 200-degree C. If the work outputs is 1000 kJ/kg, determine the thermal efficiency and the MEP. Also compare with the efficiency of an Otto cycle operating with the same maximum pressure.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
You know the right answer?
2. A diesel cycle with a compression ratio of 18 operates on air with a low temperature 200-degree C...
Questions
English, 09.07.2021 21:30
Physics, 09.07.2021 21:30
Biology, 09.07.2021 21:30
History, 09.07.2021 21:30
Chemistry, 09.07.2021 21:30
Computers and Technology, 09.07.2021 21:30
