Engineering, 21.03.2020 09:44 hamnah83
An alloy is evaluated for potential creep deformation in a short-term laboratory experiment. The creep rate (ϵ˙) is found to be 1% per hour at 800 ∘C and 5.5×10−2% per hour at 700 ∘C. Calculate the activation energy for creep in this temperature range.
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
An alloy is evaluated for potential creep deformation in a short-term laboratory experiment. The cre...
Mathematics, 23.09.2019 20:00
History, 23.09.2019 20:00
Chemistry, 23.09.2019 20:00
Computers and Technology, 23.09.2019 20:00
Computers and Technology, 23.09.2019 20:00
English, 23.09.2019 20:00
Mathematics, 23.09.2019 20:00
Mathematics, 23.09.2019 20:00
Social Studies, 23.09.2019 20:00