Engineering, 23.03.2020 17:13 tay840

Shell- and-Tube Heat Exchanger to Heat Chicken Broth
A double-pipe HX operated in counter-current mode is used to heat chicken soup broth. The heat exchanger consists of a 2 in. schedule 80 stainless steel inside the pipe and a 4 in. schedule 40 stainless steel outside the pipe. The broth at 20oC enters the inside pipe at a volumetric flow rate of 10.0 L/min. and must exit at 80oC. The heating fluid is water which enters the shell side at 95oC and exits at 65oC. The overall heat transfer coefficient (U) and heat exchanger size (Area and Length) must be calculated.
Note: Assume the properties of the chicken broth are the same as water.
a. Sketch and completely label the process, including inlet and outlet streams. State all assumptions.
b. Sketch the expected temperature profile in the HX.
c. Calculate the overall heat transfer coefficient (U). Calculate and list separately all resistances. Which resistance is the dominant resistance to heat transfer?
d. Calculate the log-mean-temperature difference for the HX.
e. Calculate the required Area of the HX and Length of the double-pipe heat exchanger.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 19:10

The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Agas contained within a piston-cylinder assembly e end nation about same energy states, 1 and 2, where pi 10 bar, v undergoes two processes, a and b, between the sam 0.1 m3, ui-400 kj and p2 1 bar, v2 1.0 m2, u2 200 kj: process a: process from 1 to 2 during which the pressure- volume relation is pv constant process b: constant-volume process from state 1 to a pressure of 2 bar, followed by a linear pressure-volume process to +20 0 state 2 kinetic and potential energy effects can be ignored. for each of the processes a and b, (a) sketch the process on p-v coordinates, (b) evaluate the work, in kj, and (c) evaluate process the heat transfer, in kj

Answers: 2

Answer

Engineering, 06.07.2019 02:30

Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.

Answers: 1

Answer

Engineering, 06.07.2019 03:10

List and describe the parts of boxford cnc milling machine with pictures?

Answers: 2

Answer

You know the right answer?

Shell- and-Tube Heat Exchanger to Heat Chicken Broth
A double-pipe HX operated in counter-cur...

Questions