Design a circuit with inputs A, B,C, and D. Let the two inputs AB represent a two-bit number with A as the high order bit, and CD represent another two-bit number. That is, the values on AB represent four values 00 (0), 01 (1), 10 (2), and 11 (3). The circuit has three outputs: G, E, and L. Output G, E, and L should be 1 only if the number represented by AB is greater, equal, and less than the number represented by CD, respectively.

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.