Engineering, 23.03.2020 22:51 famouzgal
In the data statement below, only word aa is defined, while bb, cc, dd, ee, and ff are simply placeholders for results, and are initially declared with a value of 0. Data word aa is defined as shown. Divide aa by 9, and store in bb. Subtract bb from aa and store in cc. OR aa and cc and store the results in dd. AND aa and dd and store in ee. XOR dd and ee and store that final result in ff. Output only the value of ff, preceded by a leader that says, "Final answer = ". Stop the program as usual.
Answers: 3
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
In the data statement below, only word aa is defined, while bb, cc, dd, ee, and ff are simply placeh...
Mathematics, 11.09.2020 22:01
English, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01
Social Studies, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01
English, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01
Biology, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01
Biology, 11.09.2020 22:01
Mathematics, 11.09.2020 22:01