Engineering, 24.03.2020 02:02 Poppie9332
What are the determining factors in a ship's seaworthiness?
Answers: 1
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
What are the determining factors in a ship's seaworthiness?...
Mathematics, 17.12.2020 18:10
Chemistry, 17.12.2020 18:10
History, 17.12.2020 18:10
English, 17.12.2020 18:10
Mathematics, 17.12.2020 18:10
Mathematics, 17.12.2020 18:10
History, 17.12.2020 18:10
Mathematics, 17.12.2020 18:10
English, 17.12.2020 18:10
Mathematics, 17.12.2020 18:10
Mathematics, 17.12.2020 18:10
English, 17.12.2020 18:10
Geography, 17.12.2020 18:10