Engineering, 24.03.2020 19:53 rubend661
18. Technician A says that the engine block is the solid frame from which all automotive and truck engines are constructed
and is made out of cast iron or aluminum. Technician B says that the cylinders are deep, can-shaped holes that are drilled into
the engine block, and that the up-and-down movement of the pistons inside the cylinders produces the power needed to
operate the vehicle. Who is right?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
You know the right answer?
18. Technician A says that the engine block is the solid frame from which all automotive and truck e...
Questions
History, 02.03.2020 16:56
Health, 02.03.2020 16:56
English, 02.03.2020 16:56
English, 02.03.2020 16:56
English, 02.03.2020 16:56
