Engineering, 25.03.2020 16:52 Christyy1837

Point A needs to send a 50 kb file to point B. Each packet will contain L = 1000 bits of data. The distance between Points A and B is d = 50 km. The propagation velocity is V = 2 x 108 m/sec. The transmit data rate is N = 10 Mbps. Sliding Window flow control is used with a window size (W) of five. Both points A and B have buffers large enough to handle the sliding window protocol.

How long would it take to transfer the file from point A to point B?

a. Time to transmit one frame:
b. Time to transmit W frames:c. Time to propagate last bit of the first frame from A to B:
d. Time to propagate ACK frame from B to A:
e. Total time to transmit and acknowledge first frame:
f. Time to transfer file:

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

Answer

You know the right answer?

Point A needs to send a 50 kb file to point B. Each packet will contain L = 1000 bits of data. The d...

Questions