Engineering, 26.03.2020 00:59 mrsqueenbabe516
A straight fin fabricated from 2024 aluminum alloy ( 185 W/m·K) has a base thickness of 3 mm and a length of 15 mm. Its base temperature is 100°C, and it is exposed to a fluid for which [infinity] 20°C and 75 W/m2·K. For the foregoing conditions and a fin of unit width, compare the fin heat rate, efficiency, and volume for rectangular, triangular, and parabolic profiles.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:20
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)
Answers: 2
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
A straight fin fabricated from 2024 aluminum alloy ( 185 W/m·K) has a base thickness of 3 mm and a l...
Questions
Chemistry, 13.07.2019 00:00
Mathematics, 13.07.2019 00:00
Social Studies, 13.07.2019 00:00
History, 13.07.2019 00:00
Business, 13.07.2019 00:00
Spanish, 13.07.2019 00:00
Business, 13.07.2019 00:00
