Engineering, 26.03.2020 17:38 ksawyer745
Water at 20 °C with a mass of 10 kg is in a piston/cylinder assembly with an initial volume of 1 m³. The piston initially resting on the stops has a mass such that a pressure of 150 kPa will float it. Now the water is slowly heated to 150 °C.
(a) Represent the heating process using the appropriate piston-cylinder schematic sequence. Include all the known variables.
(b) Find the initial state (v, T, P, and x in case there is a saturated mixture in the system).
(c) Find the state of the water when the piston is about to rise (v, T, P, and x in case there is a saturated mixture in the system).
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
You know the right answer?
Water at 20 °C with a mass of 10 kg is in a piston/cylinder assembly with an initial volume of 1 m³....
Questions
Computers and Technology, 01.12.2020 04:20
Arts, 01.12.2020 04:20
History, 01.12.2020 04:20
Mathematics, 01.12.2020 04:20
Arts, 01.12.2020 04:20
