subject
Engineering, 26.03.2020 20:24 Tyrant4life

A heat pump cycle is used to maintain the interior of a building at 15°C. At steady state, the heat pump receives energy by heat transfer from well water at 9°C and discharges energy by heat transfer to the building at a rate of 120,000 kJ/h. Over a period of 14 days, an electric meter records that 2000 kW · h of electricity is provided to the heat pump. Determine the following (13 points) : (a) the amount of energy that the heat pump receives over the 14-day period from the well water by heat transfer, in kJ; (b) the heat pump’s coefficient of performance.; EGMN 204 Spring 2020 4 (c) the coefficient of performance of a reversible heat pump cycle operating between hot and cold reservoirs at 15°C and 9°C.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 19:10
Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?
Answers: 2
You know the right answer?
A heat pump cycle is used to maintain the interior of a building at 15°C. At steady state, the heat...
Questions
Questions on the website: 13722362