Engineering, 26.03.2020 22:56 Monicaamm12983

A long rod of 60-mm diameter and thermophysical properties rho = 8000 kg/m3 , c = 500 J/kg·K, and k = 50 W/m·K is initially at a uniform temperature and is heated in a forced convection furnace maintained at 750 K. The convection coefficient is estimated to be 1000 W/m2 ·K. (a) What is the centerline temperature of the rod when the surface temperature is 550 K? (b) In a heat-treating process, the centerline temperature of the rod must be increased from Ti = 300 K to T = 500 K. Compute and plot the centerline temperature histories for h = 100, 500, and 1000 W/m2 ·K. In each case the calculation may be terminated when T = 500 K.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

You know the right answer?

A long rod of 60-mm diameter and thermophysical properties rho = 8000 kg/m3 , c = 500 J/kg·K, and k...

Questions