Engineering, 28.03.2020 01:17 tinamarie04ts
Compare the tensile load capacity of a 5/16-18 UNC thread and a 5/16-24 UNF thread made of the same material.
Which is stronger?
Make the same comparison for M8 x 1.25 and M8 x 1 ISO threads.
Compare them all to the strength of a 5/16-14 Acme thread.
The material strength for all threads is S 100 kilopound per square inch.
Answers: 3
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
Compare the tensile load capacity of a 5/16-18 UNC thread and a 5/16-24 UNF thread made of the same...
Mathematics, 19.04.2021 21:20
Mathematics, 19.04.2021 21:20
Mathematics, 19.04.2021 21:20
Mathematics, 19.04.2021 21:20
Computers and Technology, 19.04.2021 21:20
Biology, 19.04.2021 21:20
Mathematics, 19.04.2021 21:20
Physics, 19.04.2021 21:20
Mathematics, 19.04.2021 21:20
Social Studies, 19.04.2021 21:20