Engineering, 30.03.2020 17:28 dlow4974
The composition of stainless steel is best described as an iron-carbon alloy with: Group of answer choices low carbon content, a little manganese and only residual amounts of other impurities. normally between 3.1 and 4.0 wt% carbon and some silicon. significant nickel. normally between 3.1 and 4.0 wt% carbon and some chromium. significant chromium.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
You know the right answer?
The composition of stainless steel is best described as an iron-carbon alloy with: Group of answer c...
Questions
Mathematics, 18.12.2019 19:31
Social Studies, 18.12.2019 19:31
Mathematics, 18.12.2019 19:31
History, 18.12.2019 19:31
History, 18.12.2019 19:31
