A rectangular beam made of ABS plastic ( ) is b=20mm deep and t=10mm thick. Loads in the plane of the 20mm depth cause a bending moment of . What is the largest throughthickness edge crack that can be permitted if a safety factor of 2.5 against brittle fracture is required? (You may use .) (20points)

Here is the full question

A rectangular beam made of ABS plastic ( ) has dimensions b = 20 mm deep and t = 10 mm thick. Loads in the plane of the 20mm depth cause a bending moment of 10 N.m. What is the largest through thickness edge crack that can be permitted if a factor of safety of 2.5 against fracture is required?

1.62 mm

Explanation:

The formula for the stress intensity factor (K) for various bending, curves and equation label is expressed as:

where = gross section nominal stress for center cracked plate of ABS plastic rectangular beam and it's given as:

To determine the stress intensity factor K ; we have:

K =

From the table of fracture toughness of polymers and ceramics at room temperature, we selected the fracture toughness of ABS plastics material to be :

So; K =

The largest through thickness edge crack that can be permitted due to bending moment of 10 N.m  is :

a =

a = 0.00162 m

a = 1.62 mm

Thus , the  largest through thickness edge crack that can be permitted due to bending moment of 10 N.m  is 1.62 mm

answer:

an example of solubility is salt or sugar dissolving in water.

rate as brainliest plz