subject
Engineering, 30.03.2020 22:18 kenzie19169

A hot-water stream at 60oC enters a mixing chamber with a mass flow rate of 0.5 kg/s where it is mixed with a stream of cold water at 10oC. If it is desired that the mixture leave the chamber at 41oC, determine the mass flow rate of the cold-water stream. Assume all the streams are at a pressure of 250 kPa.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
A hot-water stream at 60oC enters a mixing chamber with a mass flow rate of 0.5 kg/s where it is mix...
Questions
question
Biology, 31.08.2019 12:10
Questions on the website: 13722363