Engineering, 30.03.2020 20:47 sierravick123owr441

Problem Statement: Design a small-signal voltage amplifier using BJT's that meets the following specifications: 1) Voltage gain of 50 or more 2) Minimum input resistance of 15 kΩ 3) Output resistance less than 100 Ω 4) Maximum unclipped output of 2V peak-to-peak 5) Power supply voltage of 9 V 6) Lower current drain from supply voltage
Hint: You may use a multi-stage small-signal amplifier to achieve desirable input resistance, voltage gain, output resisntace, etc. A common-emitter amplifier with an emitter resistance RE, but without an emitter by-pass capacitor CE is good for high input resistance, common-emitter amplifier using an emitter bypass capacitor is good for high voltage gain, and the use of an emitter follower results in a low output resistance.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

Problem Statement: Design a small-signal voltage amplifier using BJT's that meets the following spec...

Questions