Engineering, 30.03.2020 21:05 shygrl05

Lumber jacks use cranes and giant tongs to hoist their goods into trucks for transport. Fortunately, smaller versions of these devises are available for weekend warriors who want to play with their chain saws. Let us model the illustrated tongs as a planar mechanism that carries a log of weight N. Given the following dimensions: 35 mm 10 mm 40 mm 230 mm 85 mm 45 mm 10 mm 35 mm 345 mm determine the force in N and moment in Nm that our worker exerts on the tongs. Also determine the pinching force magnitude in N that the tongs exert on the log; i. e. determine the horizontal force that the tong's teeth exert on the log. Assume the point is centered between the tong's teeth. Matlab input: a

Answers: 2

Show answers

Answers

Answer from: sophoyak

Complete Question

Lumber jacks use cranes and giant tongs to hoist their goods into trucks for transport. Fortunately, smaller versions of these devises are available for weekend warriors who want to play with their chain saws. Let us model the illustrated tongs as a planar mechanism that carries a log of weight 210 N. Given the following dimensions: 35 mm 10 mm 40 mm 230 mm 85 mm 45 mm 10 mm 35 mm 345 mm determine the force in N and moment in Nm that our worker exerts on the tongs. Also determine the pinching force magnitude in N that the tongs exert on the log; i.e. determine the horizontal force that the tong's teeth exert on the log. Assume the point E is centered between the tong's teeth.

The diagram for this question is shown on the first uploaded image

The force P is P= 210 N

and the moment M is $M = -48.3N \cdot m$

The horizontal force that the tong teeth exerts is F_T =89.67N

Explanation:

First let denote the dimension to corresponding to the diagram

$a=35mm , b= 10mm, c= 40mm, d= 230mm, e= 85mm,f= 45mm,\\g= 10mm,h=35mm,i=345mm.$

Next looking at the diagram let us consider the vertical direction

At equilibrium

$\sum F_{vertical} =0$

This mean that

P+ W = 0

Since they are acting in opposite direction the equation becomes

P - W = 0

=> P= W

=> P= 210 N

At Equilibrium Moment about F gives

$\sum M_f = 0$

=> F_T * (e +f + g+ h+ i) - F_T * (e+ f+g+ h+i) - W *d -M =0

=> M = -W *d

=> M = -210 * 0.230

=> $M = -48.3N \cdot m$

Here F_T is the horizontal force that the tong teeth exerts

Now let consider the part BAF of the system as shown on the second uploaded image

Now the angle $\theta$ is mathematically given as

$tan \theta = \frac{g+h}{a}$

=> $\theta = arctan \frac{g+h}{a}$

$= arctan (\frac{10+35}{35} )$

=52.125^o

Now at equilibrium the moment about A is

$\sum M_A = 0$

=> $P * (c+d) +M + F_{BC} cos \theta *f+F_{BC}sin\theta *(a+b) =0$

$210 * (0.040 + 0.230)-48.3+F_{BC} cos (52.125^o)*0.045+ F_{BC}sin(52.125^o)$ * (0.035 +0.010) =0

=> $10.29 +F_{BC} (0.02763+0.03552) =0$

=> $F_{BC} =\frac{10.29}{0.06315}$

=> $F_{BC} = - 162.925 N$

Looking at the forces acting on the teeth as shown on the third uploaded image

At Equilibrium the moment about D is

$\sum M_D = 0$

=> $\frac{W}{2} *d - F_T *(i+h) -F_{BC} cos \theta *h -F_{BC} sin \theta * (b+c) =0$

=> $\frac{210}{2} * 0.230 -F_T (0.345 +0.035) - (-162.925)cos(52.125^o) *0.035\\-(-162.925)sin(52.125^o)(0.010 +0.040) =0$

=> 34.081 = F_T(0.345 +0.035)

=> F_T =89.67N

Lumber jacks use cranes and giant tongs to hoist their goods into trucks for transport. Fortunately,

Answer from: Quest

twist boundary

explanation:

Answer from: Quest

answer:

an example of solubility is salt or sugar dissolving in water.

rate as brainliest plz

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

You know the right answer?

Lumber jacks use cranes and giant tongs to hoist their goods into trucks for transport. Fortunately,...

Questions