Engineering, 31.03.2020 01:03 Poohpooh1510

An air standard dual cycle has a compression ratio of 10. At the beginning of compression, 1 p kPa =100 and 1T = 300 K . The heat addition per unit mass during the combustion process is 1500 / kJ kg with two third added under constant volume and one third added under constant pressure. You may treat air as an ideal gas. Specific heats of air are v c and p v air c c R = + , respectively

Answers: 2

Show answers

Answers

Answer from: Pen350

a) Process 1-2: adiabatic compression

Process 2-3: heat addition (constant volume)

Process 3-4: heat addition (constant pressure)

Process 4-5: adiabatic expansion

Process 5-1: heat rejection (constant volume)

b) T₃ = 2146.3 K

T₄ = 2643 K

c) T₅ = 1143.5 K

d) n = 59.6%

Explanation:

the data given by the exercise are:

Dual cycle

P₁ = 100 kPa

T₁ = 300 K

r = compression ratio = 10

Heat addition = 1500 kJ/kg

a) according to the attached diagram we have to:

Process 1-2: adiabatic compression

Process 2-3: heat addition (constant volume)

Process 3-4: heat addition (constant pressure)

Process 4-5: adiabatic expansion

Process 5-1: heat rejection (constant volume)

b) If the process 1-2 is adiabatic compression, we have:

$\frac{T_{2} }{T_{1} } =(\frac{P_{2} }{P_{1} } )^{\frac{r-1}{r} } =(\frac{V_{1} }{V_{2} } )^{r-1}$

Where r = Cp/Cv = 1.4

r = V₁/V₂ = 10

$T_{2} =T_{1} (10)^{1.4-1} =300(10)^{1.4-1} =753.6K$

$P_{2} =P_{1} (10)^{1.4} =100(10)^{1.4} =2511.9kPa$

The process 2-3 is heat addition (constant volume). The total heat is:

$q=\frac{2}{3} *1500=1000kJ/kg$

q = m * Cv * (T₃ - T₂)

Where Cv = 0.718 kJ/kg K

Replacing and clearing T₃:

$T_{3} =\frac{1000}{0.718} +T_{2} =2146.3K$

$P_{3} =\frac{T_{3}*P_{2} }{T_{2} } =\frac{2146.3*2511.9}{753.6} =7154kPa$

The process 3-4 is heat addition (constant pressure), the heat addition is:

q = 1500/3 = 500 kJ/kg

q = m * Cp * (T₄ - T₃)

Cp = 1.005 kJ/kg*K

Replacing values and clearing T₄

$T_{4} =\frac{500}{1.005} +2146.3=2643K$

$V_{3} =\frac{RT_{3} }{P_{3} } =\frac{0.287*2146.3}{7154} =0.086m^{3} /kg$

$V_{4} =\frac{T_{4}V_{3} }{T_{3} } =\frac{2643*0.086}{2146.3} =0.1059m^{3} /kg$

c) The process 4-5 is adiabatic expansion, thus:

$V_{1} =\frac{RT_{1} }{P_{1} } =\frac{0.287*300}{100} =0.861m^{3} /kg$

if V₁ = V₅

$T_{5} =T_{4} (\frac{V_{4} }{V_{5} } )^{r-1} =2643(\frac{0.1059}{0.861} )^{1.4-1} =1143.5K$

d) The efficiency of the cycle is:

$n=1-(\frac{1}{r} )^{r-1} \frac{\alpha L-1}{r(L-1)\alpha +(\alpha -1)}$

Where L = V₄/V₃

α = P₃/P₂

Replacing values:

$n=1-(\frac{1}{10} )^{1.4-1} (\frac{2.848(1.2317)^{1.4}-1 }{1.41(1.2317-1)*2.848+(2.848-1)} )=0.596$ = 59.6%

An air standard dual cycle has a compression ratio of 10. At the beginning of compression, 1 p kPa =

Answer from: brooke2337

concluding part of the question

Determine;

a.) the temperature at the end of each heat addition process in K

b.) the net work of the cycle per unit mass of air in kJ/kg

c.) the thermal efficiency

(a) $T_{2}$ = 731.3 K, $T_{3}$ = 1865.8 K, $T_{4}$ = 2266.67 K and $T_{5}$ = 1145.75 K

(b) the net work of the cycle per unit mass of air = 828.41 kJ/kg

Explanation:

Given;

compression ratio $V_{1$ / $V_{2}$ =10

Heat per unit mass

$Q_{in}$ /m = 1500 kJ/kg

$Q_{23}$ /m = 1000 kJ/kg

$Q_{34}$ /m = 500 kJ/kg

$P_{1}$ = 100 kPa

$T_{1$ = 300 K

Assumptions:

1. the air in piston cylinder assembly is the closed system

2. all processes are internally reversible

3. the air is modeled as an ideal gas.

4. the compression and expansion processes are adiabatic.

5. kinetic and potential energy effect are negligible.

Note: analysis of the cycle is done by fixing each principle state of the cycle.

State 1:

$T_{1$ = 300 K ⇒ $u_{1}$ = 214.07 kJ/kg, $V_{r1}$ = 621.2

State 2: for isentropic compression

$V_{r2}$ = $V_{r1}$ * $V_{1$ / $V_{2}$ = 621.2/10 = 62.12

thus, $T_{2}$ = 731.3 K and $u_{2}$ = 535.6 kJ/kg

State 3: for the heat addition process from 2 to 3.

$u_{3}$ = $Q_{23}$ /m + $u_{2}$ = 1000 + 535.6 = 1535.6 kJ/kg

(a) thus, $T_{3}$ = 1865.8 K and $h_{3}$ = 2070.52 kJ/kg

State 4: for the heat addition process from 3 to 4

$h_{4}$ = $h_{3}$ + $Q_{34}$ /m = 2070.52 + 500 = 2570.52 kJ/kg

thus, $T_{4}$ = 2266.67 K and $V_{r4}$ = 2.013

State 5: for isentropic expansion

$V_{r5}$ = $(\frac{V_{1} }{V_{2} } * \frac{T_{3} }{T_{4} } )$ $V_{r4}$ = ((10 * (1865.8/2266.67)) = 16.57

thus, $T_{5}$ = 1145.75 K and $u_{5}$ = 885.66 kJ/kg

(b) $W_{cycle}$ = $Q_{cycle}$ , thus

$W_{cycle}$ /m = $Q_{in}$ /m - ( $u_{5}$ - $u_{1}$ ) = 1500 - (885.66 - 214.07) = 828.41 kJ/kg

η = $W_{cycle}$ /m/ $Q_{in}$ /m = 828.41/1500 = 0.552 (55.23%)

Answer from: Quest

answer:

the fed will purchase bonds from banks to inject money into the banking system. the banks can use these funds to provide loans to individuals and businesses.

explanation:

Answer from: Quest

Idon’t have any classes like this

Another question on Engineering

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

You know the right answer?

An air standard dual cycle has a compression ratio of 10. At the beginning of compression, 1 p kPa =...

Questions