Engineering, 02.04.2020 02:38 khamani623

Gas in a piston-cylinder assembly undergoes two processes in series. From state 1 to state 2 there is energy transfer by heat to the gas with a magnitude of 500 kJ, and the gas does work on the piston with a magnitude of 800 kJ. The second process, from state 2 to state 3, is a constant- pressure compression at 400 kPa during which there is a heat transfer from the gas with a magnitude of 450 kJ.

The following data are also known: U1 = 2000 kJ and U3 = 3500 kJ.

Neglecting changes in kinetic and potential energy, calculate the change in volume of the gas during process 2-3, in m3.

Make sure you have proper schematics and other diagrams to illustrate the processes.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

You know the right answer?

Gas in a piston-cylinder assembly undergoes two processes in series. From state 1 to state 2 there i...

Questions