subject
Engineering, 03.04.2020 01:47 lanaiheart7

A steam coil is immersed in a stirred heating tank. Saturated steam at 7.50 bar condenses within the coil , and the condensate emerges at at its saturation temperature. A solvent with a heat capacity of 2.30 kJ is fed to the tank at a steady rate of 12.0 kg/min and a temperature of 25°C, and the heated solvent is discharged at the same flow rate. The tank is initially filled with 760 kg of solvent at 25°C, at which point the flows of both steam and solvent are commenced. The rate at which heat is transferred from the steam coil to the solvent is given by the expression where UA (the product of a heat transfer coefficient and the area through which the heat is transferred) equals 11.5 kJ/min·°C. The tank is well stirred, so that the temperature of the contents is spatially uniform and equals the outlet temperature.

Write a differential energy balance on the tank contents.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 05.07.2019 04:30
Technician a says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. technician b says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. who is correct?
Answers: 2
You know the right answer?
A steam coil is immersed in a stirred heating tank. Saturated steam at 7.50 bar condenses within the...
Questions
question
Mathematics, 05.02.2021 03:40
question
Spanish, 05.02.2021 03:40
question
English, 05.02.2021 03:40
question
Mathematics, 05.02.2021 03:40
question
Biology, 05.02.2021 03:40
Questions on the website: 13722363