subject
Engineering, 03.04.2020 01:37 leelee8335

BookListFragment will contain a List View that, when provided with an arraylist of books, will display the book title and book author for each book in its ListView. The title and author should each be displayed in their own TextView-that is, each item in the List View will contain 2 TextViews, one showing the book title, and the other showing the book author. When the user clicks one of the books in the List View, the fragment should invoke a method in its parent with the index of the book that was clicked. The fragment should have a factory method (newInstance(ArrayList books)) that creates a fragment using a list of books to set up the fragment's initial state.

How to create a custom adapters for a listview that displays two Textviews?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
You know the right answer?
BookListFragment will contain a List View that, when provided with an arraylist of books, will displ...
Questions
question
Mathematics, 30.08.2019 07:20
question
Chemistry, 30.08.2019 07:30
question
History, 30.08.2019 07:30
Questions on the website: 13722367